How to installing your court tile for backyard

Plastic basketball court flooring floor paving is simple and convenient, do not need professional construction personnel, you can pave the suspended floor yourself, its installation steps can be divided into the following 7 steps.

1. Ground check

In paving the suspended plastic floor, we have to check the flatness of the ground, for example, we can use a ruler to measure the height of the ground expansion joints will not be a big difference, with a 2-meter ruler to check the flatness of the ground and so on. If the difference in ground level is more than 5 mm, the ground needs to be leveled.

2. Material preparation

Floating floor into the field, we need to acceptance. For example, we can randomly take a few suspended floor to check the product there is no quality problems, its size is not there is a large error and so on. We also need to check the number of floor is not enough. In addition, we need to prepare a tape measure, cutting machine, knife, rubber hammer and other installation tools.

3. Pave the court floor

We use a tape measure to measure the ground, with chalk and other markers on the ground at the installation location of the suspended floor. After determining the starting point of installation, we will be the first suspended floor of the sub-button in the direction of the edge of the site. The floor and the edge of the field need to maintain a distance of 5 centimeters. Then we put the second piece of flooring sub buckle on the first piece of flooring mother buckle. Do not snap your tile together in this step, just lay each tiles on ground until your court is fully laid out.

4. Visual inspection

Take a step back and conduct a thorough visual inspection to ensure that all sections are correctly positioned. Confirm that the basketball lane aligns perfectly with the goal, while also ensuring that the tennis lines, logos, and other markings match the diagram precisely. Pay attention to every detail to guarantee an accurate layout.

5. Snap tiles

Align the first tile with the edge of the court and press it into place. Next, place the second tile next to the first, making sure that the hook end on one side is square to the receiving end on the other. Starting with the corner closest to you, use a rubber mallet to solidify it. Continue this process, making sure to properly align the hook and receiver ends so that they interlock smoothly.

6. Installation of edging and drawing lines

Install your ramps and corner pieces as step. After edge installation, we use a tape measure on the floor to measure the position of the painting line, and use a brush in dip paint to paint the line on the floor.

7. Now you can enjoy your new backyard with ZBfloor tiles 

ZBfloor is professinal in sports floor more than 10 years, our court tiles are widly uesd in gym, preschool, courtyard, exhibitions and so on. If you have any question can feel free to contact us.